u-blox : How to upgrade Firmware on my LTE module/modemandrewc2019-07-29T17:05:45+11:00
  1. Home
  2. Knowledge Base
  3. Hardware
  4. u-blox : How to upgrade Firmware on my LTE module/modem

Platform

Platform: NetModule
Document Version: 1.1.0Read More »

Software Version

NMRS : 4.2.0.100 or higher
Modem : u-blox Toby L280

Requirements

Latest Toby L2 firmware Download
WinSCP Download
Putty Download

Introduction

This document provides a example on how to upgrade the LTE module/modem on your router.

Initial Setup

WinSCP

Run the WinSCP Installer as you would any other Windows program

Complete the installation and restart your computer, if required

Toby L2 Firmware

Connect to the router using the SCP protocol
Upload the u-blox firmware file to the /root director on the router

Upgrading the firmware

Putty

Run the Putty Installer as you would any other Windows program

Complete the installation and restart your computer, if required

NetModule

Connect to the router using the SSH protocol
Apply the firmware to the u-blox module with the following command

cli update firmware WWAN1 file:///root/nm-toby-L280_FW16.19_A01.02.tar.gz

The upgrade process will take a few minutes to complete

Restart your router

Comfirm upgrade

Web Interface

Log into the Netmodule to confirm the upgrade process was successful

Was this article helpful?