What to Look for in an Industrial Router
Discover the six key features to look for when cho...
Hot
The NB1601 industrial router designed with an embedded four-port Fast Ethernet switch, can serve as the centerpiece of your remote LAN. This rugged gateway is the perfect solution for your stationary condition monitoring and telemetry/IoT applications.
The integrated 802.11abgn WiFi radio adds further capability to your remote LAN. And the internal Global Navigation Satellite System (GNSS), which accommodates GPS, GLONASS, Galileo and BeiDou, can be used to pinpoint the NB1601 on any GIS application.
Dual SIM cards enable high availability in remote locations by accommodating two wireless WAN links (LTE/UMTS/GSM) from four different providers. This guarantees you high speed Internet access anywhere and in any environment.
The NB1601 includes an RS-232/485 combination serial interface, as well as isolated digital inputs and digital relay outputs, for all your remote management needs. It comes with embedded Linux-based routing software that supports a wide range of routing protocols including Mobile IP, OSPF, BGP and RSTP.
- A VPN protocol suite that enforces security for remote devices
- Quality of Service (QoS) so you can optimize network bandwidth
- A USB port which allows fast configuration (EasyDeploy) and firmware update via memory stick
- DIN rail mounting
- Durable metal housing suitable industrial environments with a temperature range of -40 °C to 70 °C
Ethernet Switch
4-Port Ethernet switch with VLAN support for traffic isolation.
Dual Micro SIM Card
Geo-fence SIMs for a specific region, or failover based on a specified network threshold.
Embedded Modules
Soldered down components increase reliability and reduce malfunction due to environmental factors.
Powered by ARM
Powerful ARM processor with support for ultra-low-power consumption.
Extension Connection
The extension terminal connector can be customised to connect to popular industrial interfaces.
Bluetooth and BLE
IoT smart sensors can access the Internet directly over the Bluetooth Low-Energy (BLE) interface.
IO, Serial and Power
Control the digital I/O and RS-232 interfaces from the cloud using mobile connectivity.
Hostile Environments
Designed to withstand shock, vibration, dust, humidity, ESD and salty fog.
Full Specifications
| CPU | 600 MHz Single Core ARM |
| Memory | 512 MB |
| Storage | 4 GB |
| Modules | 2 Slots |
| Standard | 100Base-TX Auto MDIX |
| Speed | 10 / 100 Mbps |
| Connector | 4 x RJ45 |
| Input Voltages | 12 VDC , 24 VDC |
| Power (Avg/Max) | 7 W , 10 W |
| Connector | 2 x Terminal block (3.5 mm) |
| Interfaces (Max) | 2 |
| Specification | LTE Cat 4, 2x2 MIMO DL 150 Mbps / UL 50 Mbps |
| Voice | CSFB |
| Connector | 2 x SMA female |
| SIMs | 2 x Micro SIM - 3FF |
| Module | u-blox |
| Bands - 4G | B1 (2100) , B3 (1800) , B5 (850) , B7 (2600) , B28 (700 APAC) , B40 (TD 2300) |
| Bands - 3G | B1 (2100) , B5 (850) , B8 (900) |
| Interfaces (Max) | 1 |
| Standard | IEEE 802.11a/b/g/n Bluetooth Low Energy Dual-band 2.4/5 GHz 2.4 GHz 2x2 MIMO 5 GHz SISO |
| Bit Rate | 144 Mbps 2.4 GHz 150 Mbps 5 GHz |
| Modes | Client , Mesh , Access Point |
| Connector | 2 x SMA female |
| Receiver | BeiDou , Galileo , GLONASS , GPS/QZSS |
| Sensitivity | Up to -164 dBm, up to 2.5m CEP |
| Antennas | Active or passive |
| Connector | 1 x SMA female |
| Standard | USB 2.0 |
| Connector | 1 x Type A |
| Function | RS232 adapter , RS-485 adapter , CAN adapter , Ethernet adapter |
| Interface | 1 x Digital In 1 x Digital Out |
| Digital In | Level 0 (0-3 VDC) Level 1 (9-32 VDC) Isolation 1’500 VDC |
| Digital Out | 0-32 VDC/1A Isolation 1500 VDC |
| Connector | 2 x Terminal block (3.5 mm) |
| Interface | RS-485 , RS-232 |
| Bit rate | Up to 1 Mbps |
| Termination | 120 Ω for RS-485 |
| Connector | 2 x Terminal block (3.5 mm) |
| Standard | FXS analog telephony |
| Functions | POTS equipment to VoIP 2G/3G/4G voice gateway DMTF tone |
| Lines | 1 x incoming , 1 x outgoing |
| Connector | 1 x RJ11 |
| Mounting | DIN-Rail |
| Dimensions (W x H x D) | 45 mm, 134 mm, 121 mm |
| Weight | 450 g |
| Operating Temperature | -40 °C to +70 °C |
| Ingress Protection | IP40 |
| Standards | EN 62368-1 , EN 301908-1 , EN 301893 , EN 301511 , EN 300328 , EN 301489-52 , EN 301489-24 , EN 301908-2 , EN 301489-17 , EN 301489-7 , EN 301489-3 , EN 301489-1 , EN 61000-6-3 , EN 301489-19 , EN 301908-13 , EN 62311 , EN 55032 , EN 61000-6-2 , EN 55035 , EN 303413 |
| Compliance | 2011/65/EU (RoHS) , CE according to 2014/53/EU (RED) |
Software Updates
Quarterly software updates to keep your device running smoothly and securely.
Mobile IP
Transparent roaming over wireless networks, staying connected regardless of location or movement.
Dedicated Bearers
Dedicate resources and QoS to give priority to defined types of network traffic.
IoT devices
Support for a range of popular protocols powering IoT devices, apps and applications.
Remotely management
Remotely manage and monitor devices with SNMP, LwM2M, Telnet, SSH, or HTTP/HTTPS.
Zero-touch provisioning
Provision new devices in your network automatically, with minimal manual intervention.
Multiple-PDN
Seperate your network traffic into different PDN’s
Linux containers
Run applications and tools natively on the device in an isolated Linux environment.
Full Specifications
| NB1601-LgSc | NB1601 Baseline Router + 1xLTE + COM-I/O |
| NB1601-LgWWtSc-G | NB1601 Baseline Router + 1xLTE + 1xWLAN + 1xBT/BLE + COM-I/O + GPS |
Router Applications
Featured Article
